Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

View OSPF Information

You can configure the Open Shortest Path First (OSPF) protocol on vEdge routers to enable routing on the service side (site-local side) of the router, thus providing reachability to networks at the routers' local sites.

To view OSPF information on a vEdge router:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the vEdge router using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the vEdge router by clicking its system IP address.
  4. In the screen that opens, select Real Time in the left pane.
  5. Perform one of the procedures below to view specific OSPF information.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device from the left pane.
  5. In the right pane, click the Real Time toggle button.
  6. Perform one of the procedures below to view specific OSPF information.

View Interfaces Running OSPF

From the command drop-down located in the right pane, select OSPF Interfaces.

CLI equivalent: show ospf interface

View OSPF Neighbors

From the command drop-down located in the right pane, select OSPF Neighbors.

CLI equivalent: show ospf neighbor

View Routes Learned from OSPF

From the command drop-down located in the right pane, select OSPF Routes.

CLI equivalent: show ospf routes

View a Summary of the OSPF Link-State Database Entries

From the command drop-down located in the right pane, select OSPF Database Summary.

CLI equivalent: show ospf database-summary

View the OSPF Link-State Database Entries

From the command drop-down located in the right pane, select OSPF Database.

CLI equivalent: show ospf database

View OSPF External Routes

From the command drop-down located in the right pane, select OSPF External Database. External routes are OSPF routes that are not within the OSPF AS (domain).

View OSPF Processes

From the command drop-down located in the right pane, select OSPF Processes.

CLI equivalent: show ospf process

Release Information

Introduced in vManage NMS in Release 15.2.

Additional Information

See the Configuring Unicast Overlay Routing article for your software release.

  • Was this article helpful?