Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

View WAN Interfaces

Transport interfaces in VPN 0 connect to a WAN network of some kind, such as the Internet, a Metro Ethernet network, or an MPLS network.

To display information about WAN interfaces on a device:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the device using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the device by clicking its system IP address. 
  4. In the screen that opens, select Real Time in the left pane.
  5. From the command drop-down located in the right pane, select Control WAN Interface Information.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device.
  5. In the right pane, click the Real Time toggle button.
  6. From the drop-down list in the right pane, select Control WAN interface.

Alternate Method:

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device.
  5. In the right pane, select Interface.
  6. In the Search box in the right pane, type transport.

CLI equivalent: show interface

Release Information

Introduced in vManage NMS in Release 15.2.

Additional Information

See the Configuring Interfaces article for your software release.

  • Was this article helpful?