Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation

View Tunnel Loss Statistics

You can display traffic loss information for a vEdge router's IPsec tunnels and for application-aware-routing.

Display Data Plane Tunnel Loss Statistics

To display information about the packets successfully and unsuccessfully transmitted and received on the data plane tunnels that originate on a vEdge router:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the vEdge router using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the vEdge router by clicking its system IP address.
  4. In the screen that opens, select Real Time in the left pane.
  5. From the command drop-down located in the right pane, select Tunnel Statistics.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose one option in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or device type.
  4. Select the router from the left pane.
  5. In the right pane, click the Real Time toggle button.
  6. From the drop-down list at the top of the right pane, select Tunnel Statistics.

CLI equivalent: show tunnel statistics

Display Traffic Loss for Application-Aware Routing

To display average packet loss information for application-aware routing, go to the Application-Aware Routing pane located on the bottom right of the vManage Dashboard screen.

CLI equivalent: show app-route statistics

Release Information

Introduced in vManage NMS in Release 15.3.

Additional Information

See the Application-Aware Routing and Configuring Security Parameters article for your software release.

  • Was this article helpful?