View Multicast Information
vEdge routers can participate in a multicast overlay network.
To view multicast information on a vEdge router:
In Releases 16.2 and later
- In vManage NMS, select the Monitor ► Network screen.
- Locate the vEdge router using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
- Select the vEdge router by clicking its system IP address.
- In the screen that opens, select Real Time in the left pane.
- Perform one of the procedures below to view specific multicast information.
In Releases 16.1 and earlier
- In vManage NMS, select the Monitor ► Network screen.
- From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
- Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
- Select the device from the left pane.
- In the right pane, click the Real Time toggle button.
- Perform one of the procedures below to view specific multicast information.
View Topology Information about the Multicast Domain
From the command drop-down located in the right pane, select Multicast Topolocy.
CLI equivalent: show multicast topology
View Peers That Support Multicast
From the command drop-down located in the right pane, select OMP Multicast Advertised Autodiscover or OMP Multicast Received Autodiscover.
CLI equivalent: show omp multicast multicast-auto-discover
View Information about IPsec Tunnels between Multicast Peers
From the command drop-down located in the right pane, select Multicast Tunnels.
CLI equivalent: show multicast tunnel
View Multicast Reverse-Path Forwarding Information
From the command drop-down located in the right pane, select Multicast RPF.
CLI equivalent: show multicast rpf
View Multicast Replicators
From the command drop-down located in the right pane, select Multicast Replicators
CLI equivalent: show multicast replicator
View Multicast Routes That OMP Has Learned from PIM Join Messages
From the command drop-down located in the right pane, select OMP Multicast Advertised Routes or OMP Multicast Received Routes.
CLI equivalent: show omp multicast-routes
Additional Information
See the Configuring Multicast Overlay Routing article for your software release.