Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation

View Management Interfaces

VPN 512 is commonly used for out-of-band management traffic.

To display information about the interfaces in VPN 512 on a vEdge router:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the vEdge router using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the vEdge router by clicking its system IP address. 
  4. In the screen that opens, select Real Time in the left pane.
  5. From the command drop-down located in the right pane, select Interface Detail.
  6. In the Search box, type 512.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the vEdge router belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the vEdge router.
  5. In the right pane, click the Real Time toggle button.
  6. From the drop-down list in the right pane, select Interface.
  7. In the Search box in the right pane, type 512.

CLI equivalent: show interface vpn 512

Release Information

Introduced in vManage NMS in Release 15.2.

Additional Information

See the Configuring Interfaces article for your software release.

  • Was this article helpful?