Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation

View All Interfaces

Interfaces on vEdge routers handle control traffic (in VPN 0), data traffic (in VPNs other than 0 and 512), and out-of-band management traffic (in VPN 512). Interfaces on vSmart controller and vManage NMSs handle control and management traffic.

To view interface information on a vEdge router:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the device using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the device by clicking its system IP address.
  4. In the screen that opens, select Interface in the left pane.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the vEdge router belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device.
  5. In the right pane, click the Real Time toggle button.
  6. Perform one of the procedures below to view specific interface information.

View Interface Status

From the command drop-down located in the right pane, select Interface.

CLI equivalent: show interface

View Interface Statistics

  1. From the command drop-down located in the right pane, select Interface.
  2. In Chart Options, select the statistics to display.
  3. Beneath each graph, select the data interfaces for which to display statistics.

CLI equivalent: show interface statistics

Release Information

Introduced in vManage NMS in Release 15.2.

Additional Information

See the Configuring Interfaces article for your software release.

  • Was this article helpful?