Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

View OMP Status

The Viptela Overlay Management Protocol (OMP) is the protocol responsible for establishing and maintaining the Viptela control plane. It provides the following services:

  • Orchestration of overlay network communication, including connectivity among network sites, service chaining, and VPN topologies
  • Distribution of service-level routing information and related location mappings
  • Distribution of data plane security parameters
  • Central control and distribution of routing policy

To view OMP information on a device:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Monitor screen.
  2. Locate the device using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the device by clicking its system IP address.
  4. In the screen that opens, select Real Time in the left pane.
  5. Perform one of the procedures below to view specific OMP information.

In Releases 16.1 and earlier

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the device belongs.
  3. Choose an option in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or device type.
  4. Select the device from the left pane.
  5. In the right pane, click the Real Time toggle button.
  6. Perform one of the procedures below to view specific OMP information.

View OMP Summary Information

From the command drop-down located in the right pane, select OMP Summary.

CLI equivalent: show omp summary

View OMP Peering Sessions

From the command drop-down located in the right pane, select OMP Peers.

CLI equivalent: show omp peers

Release Information

Introduced in vManage NMS in Release 15.2.

Additional Information

See the Configuring OMP article for your software release.
omp

  • Was this article helpful?