Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

View Cellular Interface Information

You can view cellular interface information on a vEdge 100 router. To do so:

In Releases 16.2 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. Locate the device using the Sort options drop-down and the Search box. Or scroll through the list of devices in the device table.
  3. Select the device by clicking its system IP address.
  4. In the screen that opens, select Real Time in the left pane.
  5. Perform one of the procedures below to view specific cellular interface information.

In Release 16.1 and later

  1. In vManage NMS, select the Monitor ► Network screen.
  2. From the Device Groups drop-down list in the left pane, select the device group to which the vEdge router belongs.
  3. Choose the options in the Sort by drop-down to sort the device list by status, hostname, system IP, site ID, or personality.
  4. Select the device from the left pane.
  5. In the right pane, click the Real Time toggle button.
  6. Perform one of the procedures below to view specific cellular interface information.

View Cellular Modem Information and Status

From the command drop-down located in the right pane, select Cellular Modem.

CLI equivalent: show cellular modem

View Cellular Network Information

From the command drop-down located in the right pane, select Cellular Network.

CLI equivalent: show cellular network

View Cellular Profiles

From the command drop-down located in the right pane, select Cellular Profiles.

CLI equivalent: show cellular profiles

View Cellular Radio Frequency Information

From the command drop-down located in the right pane, select Cellular Radio.

CLI equivalent: show cellular radio

View Cellular Session Information

From the command drop-down located in the right pane, select Cellular Sessions.

CLI equivalent: show cellular sessions

View Cellular Status

From the command drop-down located in the right pane, select Cellular Status.

CLI equivalent: show cellular status

Release Information

Introduced in vManage NMS in Release 16.1.

Additional Information

See the Configuring Interfaces article for your software release.

  • Was this article helpful?