Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation

Change the IP Address of the vManage NMS

It is recommended that you configure the IP address of the vManage server statically, in its configuration file. Configure this IP address on a non-tunnel interface in VPN 0. It is also recommended that you do not configure DHCP in VPN 512.

When you start a vManage NMS for the first time, the default IP address of the vManage server is shown as "localhost". Before you can add a new vManage NMS to a cluster, you must change "localhost" to an IP address:

  1. In vManage NMS, select the Administration ► Cluster Management screen.
  2. In the Service Configuration tab, click the Add vManage button. The Edit vManage screen opens.
  3. From the vManage IP Address drop-down list, select an IP address to assign to the vManage server.
  4. Specify a username and password for the vManage server.
  5. Click Update.

The vManage server automatically reboots and displays the Cluster Management screen.

Release Information

Introduced in vManage NMS in Release 16.2.

  • Was this article helpful?