Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

Change Configuration Modes

You can toggle any device in the overlay network from vManage mode to CLI mode.

To toggle a WAN Edge router from vManage mode to CLI mode:

  1. In vManage NMS, select the Configuration ► Devices screen.
  2. In WAN Edge List tab, select a router.
  3. Click the Change Mode drop-down and select CLI mode.

An SSH window opens. To log in to the device, enter a username and password. You can then issue CLI commands to configure or monitor the device.

To toggle a controller device from vManage mode to CLI mode:

  1. In vManage NMS, select the Configuration ► Devices screen.
  2. In the Controllers tab, select a controller.
  3. Click the Change Mode drop-down.
  4. Select CLI mode and then select the device type. The Change Mode CLI window opens.
  5. From the vManage mode pane, select the device and click the right arrow to move the device to the CLI mode pane.
  6. Click Update to CLI Mode.

An SSH window opens. To log in to the device, enter a username and password. You can then issue CLI commands to configure or monitor the device.

Release Information

Introduced in vManage NMS in Release 15.2.

 

  • Was this article helpful?