Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

Supported Transceivers

This article provides a list of copper and fiber transceivers that have been tested and qualified for use in vEdge 1000 and vEdge 2000 routers. You can order the transceivers that have a Viptela part number in the tables below directly from Viptela.

Table 1: Supported Copper Transceivers

Manufacturer &
Part Number
Viptela
Part Number
vEdge 1000
Router
vEdge 2000
Router
vEdge 5000
Router

Description
Finisar
FCLF-8521-3
SFP-1GE-Base-T X X X
  • Small form-factor pluggable (SFP) transceiver
  • RJ45-type connector
  • 10/100/1000-Mbps Ethernet
Finisar
FCLF8521P2BTL
SFP-1GE-Base-T X X X
  • SFP transceiver
  • RJ45-type connector
  • 10/100/1000-Mbps Ethernet
Cisco-Avago
SFBR-5766PZ-CS2
  X X X
  • SFP transceiver
  • RJ45-type connector
  • 10/100/1000-Mbps Ethernet
Bel-Fuse
​1GBT-SFP05
  X X X
  • SFP transceiver
  • RJ45-type connector
  • 10/100/1000-Mbps Ethernet
Avago
​ABCU-5710RZ
  X X X
  • SFP transceiver
  • RJ45-type connector
  • 10/100/1000-Mbps Ethernet
Cisco
​GLC-T1000BASE-T
  X X X
  • SFP transceiver
  • RJ45-type connector
  • 10/100/1000-Mbps Ethernet

 

Table 2: Supported Fiber Transceivers

Manufacturer & Part Number Viptela Part Number vEdge 1000 Router vEdge 2000 Router vEdge 5000 Router
Description
Avago
AFBR-5710PZ
  X X X
  • Small form-factor pluggable (SFP) transceiver
  • LC-type connector
  • Short-reach 850-nm optics over multimode fiber for 1-Gbps applications
Avago
AFCT-5710PZ
  X X X
  • SFP transceiver
  • LC-type connector
  • Long-reach 1310-nm optics for single-mode fiber up to 10 km for 1-Gbps applications
Finisar
FTLF1318P3BTL
SFP-1GE-LX X X X
  • SFP transceiver
  • LC-type connector
  • Long-reach 1310-nm optics for single-mode fiber up to 10 km for 1-Gbps applications
Cisco-Finisar
FTLF8519P2BCL-C4
  X X X
  • SFP transceiver
  • LC-type connector
  • Short-reach 850-nm optics over multimode fiber for 1-Gbps applications

Finisar
FTLF8519P3BNL

SFP-1GE-SX X X X
  • SFP transceiver
  • LC-type connector
  • Short-reach 850-nm optics for multi-mode fiber for 1-Gbps applications
Finisar
​FTLX8571D3BCL
SFP+-10GE-SR   X X
  • SFP+ transceiver
  • LC-type connector
  • Short-reach 850-nm optics over multimode fiber for 10-Gbps applications
Finisar
FTLX8571D3BCV
    X X
  • SFP+ transceiver
  • LC-type transceiver
  • Short-reach 850-nm optics for multi-mode fiber for dual-rate 1 Gbps/10 Gbps applications

Note : The SFP+ ports of the 10-Gigabit Ethernet PIM support a rate of 10 Gbps only. 1 Gbps is not supported.

Finisar
FTLX1471D3BCV
    X X
  • SFP+ transceiver
  • LC-type connector
  • Long-reach 1310-nm optics for single-mode fiber up to 10 km for dual-rate 1 Gbps/10 Gbps applications

Note: The SFP+ ports on the 10-Gigabit Ethernet PIM support a rate of 10 Gbps only. 1 Gbps is not supported.

Finisar
FTLX1471D3BCL
SFP+-10GE-LR   X X
  • SFP+ transceiver
  • LC-type connector
  • Long-reach 1310-nm optics for single-mode fiber up to 10 km for 10-Gbps applications

  • Was this article helpful?