Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

vEdge 100wm Router Default Configuration

Each vEdge 100wm router is shipped from the factory with a default configuration. The default configuration file sets the default CLI prompt to vEdge#, configures OMP, and enables logging of syslog messages to a file.

Default Configuration for Software Releases 16.3 and Later

For Releases 16.3 and later, the default configuration file looks like this:

vEdge100wm# show running-config
system
 host-name vedge
 vbond ztp.viptela.com
 aaa
  auth-order local radius tacacs
  usergroup basic
   task system read write
   task interface read write
  !
  usergroup netadmin
  !
  usergroup operator
   task system read
   task interface read
   task policy read
   task routing read
   task security read
  !
  user admin
   password $6$kIUhwl5BwngDJKLk$Qt9Xj3WwN90bzIDL/mRmpJ33Q1nAnMGSSNK1SKhWCK/pjnM2047hYntW8C4PKUpPgYuW8FiS4KKZrN/Wx4uOY1
  !
 !
 logging
  disk
   enable
  !
 !
!
omp
 no shutdown
 graceful-restart
 advertise connected
 advertise static
!
security
 ipsec
  authentication-type ah-sha1-hmac sha1-hmac
 !
!
vpn 0
 interface cellular0
  ip dhcp-client
  tunnel-interface
   encapsulation ipsec
   color lte
   no allow-service bgp
   allow-service dhcp
   allow-service dns
   allow-service icmp
   no allow-service sshd
   no allow-service netconf
   no allow-service ntp
   no allow-service ospf
   no allow-service stun
  !
  mtu      1428
  profile  0
  technology auto (in Releases 16.3.2 and later)
  no shutdown
 !
 interface ge0/4
  ip dhcp-client
  ipv6 dhcp-client
  tunnel-interface
   encapsulation ipsec
   no allow-service bgp
   allow-service dhcp
   allow-service dns
   allow-service icmp
   no allow-service sshd
   no allow-service netconf
   no allow-service ntp
   no allow-service ospf
   no allow-service stun
  !
  no shutdown
 !
!
vpn 512
 interface ge0/0
  ip address 192.168.1.1/24
  no shutdown
 !
!

Default Configuration for Software Releases 16.2 and Earlier

For Releases 16.2 and earlier, the default configuration file looks like this:

vEdge100wm# show running-config
system
 host-name vedge
 vbond ztp.viptela.com
 aaa
  auth-order local radius tacacs
  usergroup basic
   task system read write
   task interface read write
  !
  usergroup netadmin
  !
  usergroup operator
   task system read
   task interface read
   task policy read
   task routing read
   task security read
  !
  user admin
   password $6$fTBoB4hFbObL96Rh$<wbr/>Tx3voGhKPNeTSjRsQ4AVd3dvS3R.<wbr/>A0DsOcBaNjZgXJiiUU6OldFVpqKKBP<wbr/>1CafW56nMDIi2PNEvVeBSKMf1RL0
  !
 !
logging
  disk
   enable
  !
 !
!
omp
 no shutdown
 graceful-restart
 advertise connected
 advertise static
!
security
 ipsec
  authentication-type ah-sha1-hmac sha1-hmac
 !
!
vpn 0
 interface ge0/4
  ip dhcp-client
  tunnel-interface
   encapsulation ipsec
   no allow-service bgp
   allow-service dhcp
   allow-service dns
   allow-service icmp
   no allow-service sshd
   no allow-service netconf
   no allow-service ntp
   no allow-service ospf
   no allow-service stun
  !
  no shutdown
 !
!
vpn 512
 interface ge0/0
  ip address 192.168.1.1/24
  no shutdown
 !
​!

Additional Information

Viptela Overlay Network Bringup

  • Was this article helpful?