Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation

Components and Specifications

This article provides specifications for the vEdge 100wm chassis, wireless platforms, and multiband swivel-mount dipole antennas.

Chassis Specifications

Table 1 lists the specifications for the vEdge 100wm router chassis.

Table 1: vEdge 100wm Router Chassis Specifications

Item Specification
Services and Slot Density
RJ45 Ports 10/100/1000 Mbps 5 ports, one of which has 802.3af PoE source capability
Embedded hardware-based cryptographic acceleration (IPSec) Yes
NAND storage (internal) 4 GB
USB host port 1
Mini USB connector console port (default baud rate 115.2 Kbps) 1
Power supply AC input (C6 inlet connector)
Power Specifications
AC input voltage 90-264 Vrms
AC input line frequency 47-63 Hz
Typical power consumption with PoE disabled on interface ge0/0 20 Watts
Typical power consumption with PoE enabled on interface ge0/0 35 Watts maximum
Physical Specifications (excluding the multiband antennas)
Chassis height 1.8 in. (4.5 cm)
Chassis width 9.25 in. (23.5 cm)
Chassis depth 5.75 in. (14.6 cm)
Chassis weight 1.45 lbs (0.67 kg)
Wall-mount plate accessory Provided with the unit
Packaging Specifications
Package height 5.375 in. (13.6 cm)
Package width 11.94 in. (30.3 cm)
Package depth 9.19 in. (23.3 cm)
Operating Condition
Temperature 0 to 40°C (32 to 104°F) at sea level (temperature derating of 1.5°C per 1000 feet of altitude, up to a maximum of 10,000 ft, or 3000 m)
Altitude Maximum 3000 m (10,000 ft)
Humidity 10 to 85% RH
Transportation/Storage Condition
Temperature –40 to 70°C (–40 to 158°F)
Humidity 5 to 95% RH
Altitude 4570 m (15,000 ft)
MTBF 104,000 hours
Regulatory Compliance
Safety AS/NZS 60950-1
CAN/CSA 60950-1
CE Marking
EN 60950-1
EN 300 386
EN 55022 Class B
FCC Class B
ICES Class B
VCCI Class B
Environmental ROHS 6/6

Wireless Platform Specifications

Table 2 lists the specifications for the vEdge 100wm wireless platforms.

Table 2: vEdge 100wm Wireless Platform Specifications

Platform Specification
vEdge 100wm-AT
SKU 100wm-AT
Carrier AT&T
Modem Sierra Wireless MC7354
4G LTE Bands Band 2 (1900 MHz), Band 4 (AWS 1700/2100 MHz), Band 5 (850 MHz), Band 17 (700 MHz)
Region United States
vEdge 100wm-GB
SKU 100wm-GB
Certification GCF
Modem Sierra Wireless MC7304
4G LTE Bands Band 1 (2100 MHz), Band 3 (1800 MHz), Band 7 (2600 MHz), Band 8 (900MHz), Band 20 (800 MHz)
Regions Australia, Europe, Middle East, Latin America, Asia Pacific
vEdge 100wm-NA
SKU 100wm-NA
Certification PTCRB
Modem Sierra Wireless MC7354
4G LTE Bands Band 2 (1900 MHz), Band 4 (AWS 1700/2100 MHz), Band 5 (850 MHz), Band 13 (700 MHz), Band 17 (700 MHz), Band 25 (1900 MHz)
Region North America
vEdge 100wm-NT
SKU 100wm-NT
Carrier NTT Docomo
Modem Sierra Wireless MC7330
4G LTE Bands Band 1 (2100 MHz), Band 19 (850 MHz), Band 21 (1500 MHz)
Region Japan
vEdge 100wm-SP  
SKU 100wm-SP
Carrier Sprint
Modem Sierra Wireless MC7354

4G LTE Bands

Band 25 (1900 MHz)
Region United States
vEdge 100wm-VZ
SKU 100wm-VZ
Carrier Verizon
Modem Sierra Wireless MC7354
4G LTE Bands Band 4 (AWS 1700/2100 MHz), Band 13 (700 MHz)
Region United States

Multiband Cellular Antenna Specifications

The vEdge 100wm router ships with two multiband swivel-mount dipole antennas. The articulating joint of the antenna provides 0 to 90 degrees pivot and 180-degree swivel movement, allowing vertical and horizontal orientation of the antenna.

Table 3 lists the electrical, mechanical, and frequency specifications for the antennas.

Table 3: vEdge 100wm Multiband Cellular Antenna Specifications

Item Specification
Antenna type MIMO, dipole swivel
Input power 10 Watts
Connector SMA male
Nominal impedance 50 Ohms
Radiation pattern Omnidirectional
Frequency range

698MHz to 960MHz and 1710MHz to 2700Mhz

Temperature range F (–40°C to 85°C)
Antenna dimensions

Length: 6.37 in. (16.19 cm)

Width: 0.9 in. (2.38 cm)

Depth: 0.63 in. (1.59 cm)

Humidity Noncondensing, 65°C, 95% RH

Wi-Fi Specifications

The vEdge 100wm router provides the following Wi-FI capabilities:

  • Embedded Wi-Fi radio for access point functionality
  • Wi-Fi radio configurable for 2.4-GHz or 5.0-GHz operation
  • Supports IEEE 802.11a, 802.11b, 802.11g, 802.11 n, and 802.11ac protocols
  • Supports channel bandwidth of 20 MHz, 40 MHz, and 80 MHz
  • Supports IEEE 802.11h DFS channels 
  • 3x3 MIMO with three spatial streams
  • Supports up to four different SSIDs
  • Supports up to 50 concurrent clients
  • Supports wireless security and authentication:
    • Personal and enterprise WPA/WPA2 
    • AES/CCMP encryption
    • TKIP encryption
  • Internal embedded antennas 
  • Was this article helpful?