vEdge 1000 Router Default Configuration
Each vEdge router is shipped from the factory with a default configuration. The default configuration file sets the default CLI prompt to vEdge#, configures OMP, and enables logging of syslog messages to a file.
The default configuration file looks like this:
vEdge1000# show running-config system vbond ztp.viptela.com aaa auth-order local radius tacacs usergroup basic task system read write task interface read write ! usergroup netadmin ! usergroup operator task system read task interface read task policy read task routing read task security read ! user admin password $6$t.vzhbSwOUaaCnRu$<wbr/>AiJYG3VFR1NurXPY7YXSputMMv4hg3<wbr/>Bign362rj4IIWXm7uVfiReqv/<wbr/>4EhKG2QUJSaZnZZPveQYBfIozCioyE<wbr/>/ ! ! logging disk enable ! ! ! omp no shutdown graceful-restart advertise connected advertise static ! security ipsec authentication-type ah-sha1-hmac sha1-hmac ! ! vpn 0 interface ge0/0 ip dhcp-client tunnel-interface encapsulation ipsec no allow-service bgp allow-service dhcp allow-service dns allow-service icmp no allow-service sshd no allow-service netconf no allow-service ntp no allow-service ospf no allow-service stun ! no shutdown ! ! vpn 512 interface mgmt0 ip address 192.168.1.1/24 no shutdown !