Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

Transceiver Modules

The vEdge 1000 router has a fixed-port configuration and so has no PIM slots. The built-in Gigabit Ethernet network ports on the vEdge 1000 router support SFP transceivers.

Table 1 describes the optical and copper interfaces supported for the Gigabit Ethernet SFP transceivers.

Note: It is strongly recommended that you purchase the optical transceivers and optical connectors for your vEdge 1000 router from Viptela.

Table 1: Optical Interface and Copper Interface Support for Gigabit Ethernet SFP Transceivers

Ethernet Standard

Specification

Value

1000 BASE-T

Model Number

SFP-1GE-Base-T

 

Rate

10/100/1000 Mbps

Connector Type

RJ-45

Fiber Count

N/A

Transmitter Wavelength

N/A

Minimum Launch Power

N/A

Maximum Launch Power

N/A

Minimum Receiver Sensitivity

N/A

Maximum Input Power

N/A

Fiber Type

Copper

Distance

100 m (328 ft)

DOM Support

Not available

1000 BASE-SX

Model Number

SFP-1GE-SX

 

Rate

1000 Mbps

Connector Type

LC

Fiber Count

Dual

Transmitter Wavelength

850 nm

Minimum Launch Power

-9.5 dBm

Maximum Launch Power

-3 dBm

Minimum Receiver Sensitivity

-21 dBm

Maximum Input Power

0 dBm

Fiber Type

MMF

Distance

220 m (721 ft) to 550 m (1804 ft) depending on fiber core size/modal bandwidth specification

DOM Support

Available

1000 BASE-LX

Model Number

SFP-1GE-LX

 

Rate

1000 Mbps

Connector Type

LC

Fiber Count

Dual

Transmitter Wavelength

1310 nm

Minimum Launch Power

-9.5 dBm

Maximum Launch Power

-3 dBm

Minimum Receiver Sensitivity

-25 dBm

Maximum Input Power

-3 dBm

Fiber Type

SMF

Distance

10 km (6.2 miles)

DOM Support

Available

  • Was this article helpful?