Forwarding and QoS CLI Reference
CLI commands for configuring and monitoring forwarding and QoS.
Forwarding and QoS Configuration Commands
Use the following commands to configure forwarding and QoS on a vEdge router.
policy class-map class class-name queue number cloud-qos cloud-qos-service-side mirror mirror-name remote-dest ip-address source ip-address policer policer-name rate bandwidth burst types exceed action qos-map map-name qos-scheduler scheduler-name qos-scheduler scheduler-name class class-name bandwidth-percent percentage buffer-percent percentage drops drop-type rewrite-rule rule-name
policy access-list acl-name default-action action sequence number match class class-name destination-ip prefix/length destination-port number dscp number protocol number source-ip prefix-length source-port number action drop count counter-name accept class class-name count counter-name mirror mirror-name policer policer-name set dscp value
vpn vpn-id interface interface-name access-list acl-name (in | out) interface interface-name policer policer-name (in | out)
Forwarding and QoS Monitoring Commands
Use the following commands to monitor forwarding and QoS on a vEdge router:
show policy access-list-associations
show policy access-list-counters
show policy access-list-names
show policy access-list-policers
show policy data-policy-filter
show policy qos-map-info
show policy qos-scheduler-info
Additional Information
Forwarding and QoS Overview
Forwarding and QoS Configuration Examples