System, Interface, and SNMP CLI Reference
CLI commands for configuring and monitoring system-wide parameters, interfaces, and SNMP on vEdge routers and vSmart controllers.
Interface Configuration Commands
Use the following commands to configure interfaces and interface properties in the Viptela overlay network. You configure interfaces on a per-VPN basis.
vpn vpn-id interface interface-name access-list acl-list (on vEdge routers only) arp ip ip-address mac mac-address arp-timeout seconds (on vEdge routers only) clear-dont-fragment description text dhcp-helper ip-address (on vEdge routers only) dhcp-server (on vEdge routers only) address-pool prefix/length exclude ip-address lease-time seconds max-leases number offer-time minutes options default-gateway ip-address dns-servers ip-address domain-name domain-name interface-mtu mtu tftp-servers ip-address static-lease mac-address duplex (full | half) flow-control (bidirectional | egress | ingress) (ip address address/subnet | ip dhcp-client [dhcp-distance number]) mac-address mac-address mtu bytes nat (on vEdge routers only) block-icmp-error refresh (bi-directional | outbound) tcp-timeout minutes udp-timeout minutes pmtu policer policer-name (on vEdge routers only) ppp (on vEdge routers only) ac-name name authentication (chap | pap) hostname name password password pppoe-client (on vEdge routers only) ppp-interface name qos-map name (on vEdge routers only) rewrite-rule name (on vEdge routers only) shaping-rate name (on vEdge routers only) shutdown speed speed tcp-mss-adjust bytes tunnel-interface allow-service service-name (on vEdge routers only) bind geslot/port (on vEdge routers only) carrier carrier-name color color [restrict] [no] control-connections (on vEdge routers only) encapsulation (gre | ipsec) (on vEdge routers only) preference number weight number hello-interval milliseconds hello-tolerance seconds max-controllers number upgrade-confirm minutes vrrp group-name (on vEdge routers only) priority number timer seconds track-omp
Interface Monitoring Commands
Use the following commands to monitor interfaces:
show dhcp interface
show dhcp server
show interface
show interface arp-stats
show interface errors
show interface packet-sizes
show interface port-stats
show interface queue
show interface statistics
show vrrp
SNMP Configuration Commands
Use the following commands to configure SNMP:
snmp community name authorization (read-only | read-write) view string contact string group group-name authentication view string location string name string [no] shutdown trap group group-name trap-type level severity target vpn-id ip-address udp-port community-name community-name group-name group-name source-interface interface-name user username auth authentication auth-password password group group-name priv privacy priv-password password view string oid oid-subtree [exclude]
SNMP Monitoring Commands
Use the following command to monitor SNMP:
show running-config snmp—Display the active configuration that is running on the Viptela device.
System Configuration Commands
Use the following commands to configure system-wide parameters:
banner login "text" motd "text" system aaa admin-auth-order (local | radius | tacacs) auth-fallback auth-order (local | radius | tacacs) user user-name group group-name password password usergroup group-name task (interface | policy | routing | security | system) (read | write) archive interval minutes path file-path/filename ssh-id-file file-path/filename vpn vpn-id clock timezone timezone console-baud-rate rate control-session-pps rate description text device-groups group-name domain-id domain-id gps-location (latitude decimal-degrees | longitude decimal-degrees) host-name string host-policer-pps rate icmp-error-pps rate iptables-enable location string logging disk enable file name filename rotate number size megabytes priority priority host name (name | ip-address) port udp-port-number priority priority rate-limit number interval seconds multicast-buffer-percent percentage ntp keys authentication key-id md5 md5-key trusted key-id server (dns-server-address | ip-address) key key-id prefer source-interface interface-name version number vpn vpn-id organization-name string port-hop port-offset number radius retransmit number server ip-address auth-port port-number priority number secret-key key source-interface interface-name vpn vpn-id timeout seconds site-id site-id system-ip ip-address system-tunnel-mtu bytes tacacs authentication authentication-type server ip-address auth-port port-number priority number secret-key key source-interface interface-name vpn vpn-id timeout seconds timer dns-cache-timeout minutes track-default-gateway track-transport upgrade-confirm minutes [no] usb-controller vbond (dns-name | ip-address) [local] [port number] [ztp-server]
System Monitoring Commands
Use the following commands to monitor system-wide parameters:
show aaa usergroup
show control local-properties
show logging
show ntp associations
show ntp peer
show orchestrator local-properties
show running-config system
show system status
show uptime
show users