Security CLI Reference
CLI commands for configuring and monitoring security.
Security Configuration Commands
Use the following commands to configure security parameters:
security control protocol (dtls | tls) tls-port number ipsec authentication-type type rekey seconds replay-window number vpn vpn-id interface ipsecnumber access-list acl-name block-non-source-ip clear-dont-fragment dead-peer-detection interval seconds retries number description text ike authentication-type type local-id id pre-shared-secret password remote-id id cipher-suite suite group number mode mode rekey seconds version number ip address ipv4-prefix/length ipsec cipher-suite suite perfect-forward-secrecy pfs-setting rekey seconds replay-window number mtu bytes policer policer-name rewrite-rule rule-name [no] shutdown tcp-mss-adjust bytes tunnel-destination (dns-name | ipv4-address) (tunnel-source ip-address | tunnel-source-interface interface-name)
Security Monitoring Commands
Additional Information
Configuring IKE-Enabled IPsec Tunnels
Configuring Security Parameters
Security Overview