Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

Forwarding and QoS CLI Reference

CLI commands for configuring and monitoring forwarding and QoS.

Forwarding and QoS Configuration Commands

Use the following commands to configure forwarding and QoS on a vEdge router.

policy
  class-map
    class class-name queue number
  mirror mirror-name
    remote-dest ip-address source ip-address
  policer policer-name
    rate bandwidth
    burst types
    exceed action
  qos-map map-name
    qos-scheduler scheduler-name
  qos-scheduler scheduler-name
    class class-name
    bandwidth-percent percentage
    buffer-percent percentage
    drops drop-type
  rewrite-rule rule-name 
policy
  access-list acl-name
    default-action action
    sequence number
      match
        class class-name
        destination-ip prefix/length
        destination-port number
        dscp number
        protocol number
        source-ip prefix-length
        source-port number
      action
        drop
          count counter-name
        accept
          class class-name
          count counter-name
          mirror mirror-name
          policer policer-name
          set dscp value
vpn vpn-id
  interface interface-name
    access-list acl-name (in | out)  
  interface interface-name
    policer policer-name (in | out)

Forwarding and QoS Monitoring Commands

Use the following commands to monitor forwarding and QoS on a vEdge router:

show policy access-list-associations
show policy access-list-counters
show policy access-list-names
show policy access-list-policers
​show policy data-policy-filter
show policy qos-map-info
show policy qos-scheduler-info

  • Was this article helpful?