Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show wlan radios

show wlan radios—Display information about the WLAN radios (on vEdge routers only).

Command Syntax

show wlan radios [radio-name [parameter] ]

Options

None
Display information about all WLAN radios.
Specific Radio
radio-name [parameter]
Display information about a specific radio and about a specific radio parameter. parameter can be one of the column heads in the output of the regular show wlan radios command.

Output Fields

Number of Clients
VAPs
The VAPs column shows the number of clients on the WLAN.

The remaining command output fields are self-explanatory.

Example Output

Display information about all WLAN radios:

vEdge# show wlan radios 

RADIO                                                              CHANNEL               GUARD           
NAME   MODE      BAND   MAC                COUNTRY        CHANNEL  BANDWIDTH  FREQUENCY  INTERVAL  VAPS  
---------------------------------------------------------------------------------------------------------
wifi0  802.11ac  5 GHz  80:b7:09:08:b7:6a  United States  36       80         5180       400       4

Display information about a specific radio:

vEdge# show wlan radios wifi0
wifi0 :
      IEEE 802.11ac  5 GHz  80 MHz
      MAC address: 80:b7:09:08:b7:6a
      Channel: 36 Frequency: 5180 MHz
      Regulatory country: United States
      Guard interval: 400 ns
      Number of VAPs: 4

vEdge# show wlan radios wifi0 ?
Description: Display WLAN radio information
Possible completions:
  band                Radio band
  channel             Radio channel
  channel-bandwidth   Channel bandwidth, in MHz
  country             Regulatory country code
  frequency           Frequency, in MHz
  guard-interval      Guard interval, in nanoseconds
  mac                 MAC address in aa:bb:cc:dd:ee:ff format
  mode                Radio mode
  vaps                Number of virtual access point interfaces
  |                   Output modifiers

vEdge# show wlan radios wifi0 country
country "United States"

Release Information

Command introduced in Viptela Software Release 16.3.​

  • Was this article helpful?