Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show wlan clients

show wlan clients—Display information about the clients on the wireless WAN (on vEdge routers only).

Command Syntax

show wlan clients [vap-number]

Options

Specific VAP
vap-number
Display information about the clients connected to a specific virtual access point.

Output Fields

The command output fields are self-explanatory.

Example Output

Display information about all clients connected to all VAPs on the WLAN:

vEdge# show wlan clients 

      CLIENT                                               CHANNEL    DATA      RX          ASSOC     
VAP   ID      MAC                MODE      BAND   CHANNEL  BANDWIDTH  SECURITY  RATE  RSSI  TIME      
------------------------------------------------------------------------------------------------------
vap0  0       50:50:50:50:50:50  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  1       50:50:50:50:50:53  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  2       50:50:50:50:50:56  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  3       50:50:50:50:50:59  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  4       50:50:50:50:50:51  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  5       50:50:50:50:50:54  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  6       50:50:50:50:50:57  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  7       50:50:50:50:50:52  802.11ac  5 GHz  36       80         none      175   11    00:11:43  
vap0  8       50:50:50:50:50:55  802.11ac  5 GHz  36       80         none      58    11    00:11:43  
vap0  9       50:50:50:50:50:58  802.11ac  5 GHz  36       80         none      58    11    00:11:43 

Release Information

Command introduced in Viptela Software Release 16.3.​

  • Was this article helpful?