Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show vrrp

show vrrp—Display information about the configured VRRP interfaces and groups (on vEdge routers only).

Command Syntax

show vrrp [interfaces interface-name] [groups group-number [vrrp-parameter] ]
show vrrp vpn vpn-id [interfaces interface-name] [groups group-number [vrrp-parameter] ]

Options

None
Display information about all VRRP interfaces and groups configured on the local vEdge router, for all VPNs.
Interface
interface interface-name
Display VRRP information for a specific interface.
VPN
vpn vpn-id
Refresh the dynamic ARP cache entries for the specific VPN.
VRRP Group
groups group-number
Display information for a specific VRRP group.
VRRP Parameter
groups group-number vrrp-parameter
Display information about a specific VRRP parameter in a VRRP group. vrrp-parameter can be one of the following, which correspond to the header fields in the show vrrp output:
• advertisement-timer [number]
• last-state-change-time [ccyy-mm-ddthh:mm:ss]
• master-down-timer [number]
• omp-state [down | up]
• prefix-list-state [resolved | unresolved]
• priority [number]
• track-prefix-list [prefix-list-name]
• virtual-ip [ip-address]
• virtual-mac [mac-address]
• vrrp-state [backup | init | master]

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show vrrp 
                                                                                          MASTER                             TRACK   PREFIX  
              GROUP  VIRTUAL                                VRRP    OMP    ADVERTISEMENT  DOWN                               PREFIX  LIST    
VPN  IF NAME  ID     IP        VIRTUAL MAC        PRIORITY  STATE   STATE  TIMER          TIMER   LAST STATE CHANGE TIME     LIST    STATE   
---------------------------------------------------------------------------------------------------------------------------------------------
2    ge0/6.1  2      10.2.2.4  00:0c:29:ab:b7:94  100       master  up     1              3       2017-06-21T05:21:32+00:00  -       unresolved

Release Information

Command introduced in Viptela Software Release 14.1.

Additional Information

show interface
​vrrp

  • Was this article helpful?