Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show tunnel statistics

show tunnel statistics—Display information about the packets transmitted and received on the data plane tunnels that originate on the local router (on vEdge routers only).

Command Syntax

show tunnel statistics
show tunnel statistics bfd
show tunnel statistics dest-ip
ip-address
show tunnel statistics dest-port port-number
show tunnel statistics ipsec
show tunnel statistics source-ip
ip-address
show tunnel statistics source-port port-number
show tunnel statistics tunnel-protocol (gre | ipsec)

Options

None
Display statistics for all data plane tunnels, for both IPsec and GRE tunnels. Note that the output fields are specific for IPsec, so for GRE tunnels, the values for all fields are zero or empty.
BFD Tunnels
bfd
Display statistics for all BFD tunnels.
Destination IP Address or Port
dest-ip ip-address
dest-port port-number
Display statistics for the specified destination address or destination port number.
IPsec Tunnels
ipsec
Display statistics for IPsec tunnels.
Source IP Address or Port
source-ip ip-address
source-port port-number
Display statistics for the specified source address or source port number.
Tunnel Protocol
tunnel-protocol (gre | ipsec)
Display tunnel statistics for either GRE or IPsec tunnels. To display the count of data packets, use the show interface command. To display the count of only GRE keepalive packets, use the show tunnel gre-keepalives command.

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show tunnel statistics 
                                                                                                                               TCP     
TUNNEL                            SOURCE  DEST                  LOCAL  REMOTE  TUNNEL                                          MSS     
PROTOCOL  SOURCE IP   DEST IP     PORT    PORT   SYSTEM IP      COLOR  COLOR   MTU     tx-pkts  tx-octets  rx-pkts  rx-octets  ADJUST  
---------------------------------------------------------------------------------------------------------------------------------------
ipsec     10.1.15.15  10.0.5.11   12366   12366  172.16.255.11  lte    lte     1441    31726    4895251    31723    5341408    1361    
ipsec     10.1.15.15  10.0.5.21   12366   12366  172.16.255.21  lte    lte     1441    31712    4896936    31712    5339686    1361    
ipsec     10.1.15.15  10.1.14.14  12366   12366  172.16.255.14  lte    lte     1441    31730    4899623    31727    5344598    1361    
ipsec     10.1.15.15  10.1.16.16  12366   12366  172.16.255.16  lte    lte     1441    31723    4895980    31723    5338796    1361    


vEdge# show tunnel statistics bfd
                                                 BFD    BFD                      BFD   BFD   BFD     BFD     
                                                 ECHO   ECHO   BFD      BFD      PMTU  PMTU  PMTU    PMTU    
TUNNEL                            SOURCE  DEST   TX     RX     ECHO TX  ECHO RX  TX    RX    TX      RX      
PROTOCOL  SOURCE IP   DEST IP     PORT    PORT   PKTS   PKTS   OCTETS   OCTETS   PKTS  PKTS  OCTETS  OCTETS  
-------------------------------------------------------------------------------------------------------------
ipsec     10.1.15.15  10.0.5.11   12366   12366  32284  32281  2663437  2663186  42    42    33220   31981   
ipsec     10.1.15.15  10.0.5.21   12366   12366  32267  32267  2662031  2662024  45    45    37623   32407   
ipsec     10.1.15.15  10.1.14.14  12366   12366  32283  32280  2663358  2663100  47    47    37917   35002   
ipsec     10.1.15.15  10.1.16.16  12366   12366  32282  32282  2663265  2663265  41    41    34228   29273     

Release Information

Command introduced in Viptela Software Release 14.1.
In Release 15.4.1, add support for GRE tunnels.
In Release 16.3.2, add bfd option and display BFD hello and PMTU packet statistics.

  • Was this article helpful?