Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show tunnel gre-keepalives

show tunnel gre-keepalives—Display information about the keepalive packets transmitted and received on GRE tunnels that originate on the local router (on vEdge routers only).

Command Syntax

show tunnel gre-keepalives [vpn-id]

Options

None
Display keepalive information for all GRE tunnels.
Specific VPN
vpn-id
Display keepalive information for GRE tunnels in a specific VPN.

Output Fields

Admin State—Whether the GRE interface is operational or shut down.
KA Enabled—Indicates whether keepalives are enabled on the GRE interface.
Remote TX and RX Packets—Keepalive packets transmitted and received by the remote end of the GRE tunnel.
TX and RX Packets—Keepalive packets transmitted and received by the local end of the GRE tunnel, that is, by the local vEdge router.

The other output fields are self-explanatory.

Example Output

vEdge# show tunnel gre-keepalives

                                                             REMOTE   REMOTE                                     
     IF                               ADMIN  OPER   KA       TX       RX       TX       RX       TX      RX      
VPN  NAME  SOURCE IP  DEST IP         STATE  STATE  ENABLED  PACKETS  PACKETS  PACKETS  PACKETS  ERRORS  ERRORS  TRANSITIONS
----------------------------------------------------------------------------------------------------------------------------
0    gre1  10.0.5.11  172.168.1.1     up     down   true     0        0        370      0        0       0       0
0    gre2  10.0.5.11  172.168.122.11  up     down   true     0        0        644      0        0       0       0

Release Information

Command introduced in Viptela Software Release 15.4.1.

  • Was this article helpful?