Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation

show reboot history

show reboot history—Display the history of when this device has been rebooted.

Command Syntax

show reboot history



Output Fields

In the Reboot Reason, if user issued the reboot command, the underlying logging mechanism does not log the user name, so this column shows that the reboot request was initiated by an unnamed user.

The remaining output fields are self-explanatory.

Example Output

vEdge# show reboot history

2016-03-14T23:24:43+00:00  Initiated by user - patch
2016-03-14T23:36:20+00:00  Initiated by user
2016-03-15T21:06:56+00:00  Initiated by user - activate next-1793
2016-03-15T21:10:11+00:00  Software initiated - USB controller disabled
2016-03-15T21:12:53+00:00  Initiated by user
2016-03-15T23:47:59+00:00  Initiated by user
2016-03-15T23:54:49+00:00  Initiated by user
2016-03-15T23:58:28+00:00  Initiated by user
2016-03-16T00:01:32+00:00  Initiated by user
2016-03-16T00:11:02+00:00  Initiated by user
2016-03-16T00:14:42+00:00  Initiated by user
2016-03-16T00:20:30+00:00  Initiated by user
2016-03-16T00:27:11+00:00  Initiated by user
2016-03-16T00:38:46+00:00  Software initiated - watchdog expired
2016-03-16T00:49:25+00:00  Software initiated - watchdog expired
2016-03-16T01:00:07+00:00  Software initiated - watchdog expired
2016-03-16T03:22:05+00:00  Initiated by user
2016-03-16T03:35:40+00:00  Initiated by user
2016-03-16T21:42:19+00:00  Initiated by user
2016-03-16T22:00:25+00:00  Initiated by user

Release Information

Command introduced in Viptela Software Release 14.1.

Additional Information

show system status

  • Was this article helpful?