Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation

show policy access-list-policers

show policy access-list-policers—Display information about the policers configured in IPv4 access lists (on vEdge routers only).

Command Syntax

show policy access-list-policers



Output Fields

The name shown in the Policer Name field is prefixed by the policy sequence number, to indicate which portion of the policy was responsible for applying the policer. For example, if the policer "my_policer" is referenced in sequence 20, the policer name is displayed as "20.my_policer". This output is shown in Releases 16.2.5 and later.

The remaining fields are self-explanatory.

Example Output

Display a list of policers configured in access lists. This output shows that the policer named "p1_police" was applied in sequence 10 in the access list "acl_p1" in sequences 10, 20, and 30 in the "acl_plp" access list.

vEdge# show policy access-list-policers
acl_p1              10.p1_police  0        
acl_plp             10.p1_police  0        
                    20.p1_police  0        
                    30.p2_police  0           

Release Information

Command introduced in Viptela Software Release 14.1.
In Release 16.2.5, add the policy sequence number to the policer name.

  • Was this article helpful?