Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show ospf neighbor

show ospf neighbor—List information about OSPF neighbors (on vEdge routers only).

Command Syntax

show ospf neighbor [detail] [vpn vpn-id]
show ospf route vpn vpn-id [ip-address[ospf-property] ]

Options

None
List standard information about OSPF neighbors.
Detailed Information
detail
List detailed information about OSPF neighbors.
Specific OSPF Route Information
vpn vpn-id ip-address [ospf-property]
List the information about entries for specific OSPF route and, optionally, for a specific interface index and a specific OSPF property on that interface. For a list of OSPF properties, see the fields in the show ospf neighbor detail command output, shown below.
VPN-Specific Routes
vpn vpn-id
List only the OSPF neighbors in the specified VPN.

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show ospf neighbor 
DBsmL -> Database Summary List
RqstL -> Link State Request List
RXmtl -> Link State Retransmission List
                INTERFACE  IF                                  DEAD                        
VPN  ADDRESS    INDEX      NAME   NEIGHBOR ID    STATE    PRI  TIMER  DBsmL  RqstL  RXmtL  
-------------------------------------------------------------------------------------------
0    10.0.5.13  0          ge0/2  172.16.255.13  full     13   36     0      0      0      
0    10.0.5.21  0          ge0/2  172.16.255.21  two-way  0    36     0      0      0      
1    10.2.2.12  0          ge0/0  172.16.255.12  full     1    36     0      0      0 
vEdge# show ospf neighbor vpn 1 detail
ospf neighbor vpn 1 neighbor 10.2.2.12 interface-index 0
 if-name                     ge0/0
 router-id                   172.16.255.12
 if-address                  10.2.2.12
 area                        0
 area-type                   regular
 neighbor-state              full
 interface-state             if-dr
 priority                    1
 state-changes               6
 progressive-change-time     504
 designated-router-id        10.2.2.12
 backup-designated-router-id 10.2.2.11
 dead-timer                  30
 db-summary-list             0
 link-state-req-list         0
 link-state-retrans-list     0
 options                     E

Release Information

Command introduced in Viptela Software Release 14.1.

  • Was this article helpful?