Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show omp summary

show omp summary—Display information about the OMP sessions running between vSmart controllers and vEdge routers (on vSmart controllers and vEdge routers only).

Command Syntax

show omp summary [parameter-name]

Options

None
List information about the OMP peering sessions running on the local device
Information about a Specific Parameter
parameter-name
Display configuration information about a specific OMP peering session parameter. parameter-name can be one of the following: adminstatedevicetype, ompdowntime, ompuptime, operstate, peers, routes-installed, routes-received, routes-sent, services-installed, services-sent, tlocs-installed, tlocs-receivedtlocs-sent, and vsmart-peers. For an explanation of these parameters, see the Output Fields below.

Output Fields

Field

Explanation

admin-state

Administrative state of the OMP session. It can be UP or DOWN.

omp-uptime

How long the OMP session has been up and operational.

oper-state

Operational status of the OMP session. It can be UP or DOWN.

personality

Viptela device personality.

routes-installed

Number of routes installed over the OMP session.

routes-received

Number of routes received over the OMP session.

routes-sent

Number of routes sent over the OMP session.

services-installed

Number of services installed that were learned over OMP sessions.

services-received

Number of services received over OMP sessions.

services-sent

Number of services advertised over OMP sessions.

tlocs-installed

Number of TLOCs installed that were learned over OMP sessions.

tlocs-received

Number of TLOCs received over OMP sessions.

tlocs-sent

Number of TLOCs advertised over OMP sessions.

vsmart-peers

Number of vSmart peers that are up.

Example Output

vEdge# show omp summary 
oper-state             UP
admin-state            UP
personality            vedge
omp-uptime             0:19:05:45
routes-received        16
routes-installed       8
routes-sent            0
tlocs-received         7
tlocs-installed        3
tlocs-sent             2
services-received      1
services-installed     0
services-sent          2
mcast-routes-received  0
mcast-routes-installed 0
mcast-routes-sent      0
hello-sent             27471
hello-received         27460
hsndshake-sent         6
handshake-received     6
alert-sent             2
alert-received         2
inform-sent            8
inform-received        8
update-sent            48
update-received        213
policy-sent            0
policy-received        0
total-packets-sent     27535
total-packets-received 27689
vsmart-peers           2

vSmart# show omp summary   
oper-state             UP
admin-state            UP
personality            vsmart
omp-uptime             0:19:07:20
routes-received        18
routes-installed       0
routes-sent            32
tlocs-received         8
tlocs-installed        4
tlocs-sent             16
services-received      8
services-installed     4
services-sent          4
mcast-routes-received  0
mcast-routes-installed 0
mcast-routes-sent      0
hello-sent             80765
hello-received         80782
hsndshake-sent         13
handshake-received     13
alert-sent             4
alert-received         4
inform-sent            24
inform-received        24
update-sent            633
update-received        278
policy-sent            0
policy-received        0
total-packets-sent     81439
total-packets-received 81101
vsmart-peers           1
vedge-peers            4

Release Information

Command introduced in Viptela Software Release 14.1.

  • Was this article helpful?