Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show ipv6 policy access-list-policers

show ipv6 policy access-list-policers—Display information about the policers configured in IPv6 access lists (on vEdge routers only).

Command Syntax

show ipv6 policy access-list-policers

Options

None

Output Fields

The remaining fields are self-explanatory.

Example Output

Display a list of policers configured in access lists. This output shows that the policer named "p1_police" was applied in sequence 10 in the access list "ipv6_p1" in sequences 10, 20, and 30 in the "ipv6_plp" access list.

vEdge# show policy access-list-policers
                                  OOS      
NAME                POLICER NAME  PACKETS  
-------------------------------------------
ipv6_p1             10.p1_police  0        
ipv6_plp            10.p1_police  0        
                    20.p1_police  0        
                    30.p2_police  0           

Release Information

Command introduced in Viptela Software Release 16.3.

  • Was this article helpful?