Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show ip mfib summary

show ip mfib summary—Display a summary of all active entries in the Multicast Forwarding Information Base (MFIB) (on vEdge routers only).

Command Syntax

show ip mfib summary
show ip mfib summary [group-number] [group-address] [source-address] [num-service-oils | num-tunnel-oils | upstream-if | upstream-tunnel]

Options

None
List standard information about outgoing interfaces from the MFIB.
Specific Information
[group-number] [group-address] [source-address] [num-service-oils | num-tunnel-oils | upstream-if | upstream-tunnel]
List more specific information from the MFIB.

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show ip mfib summary
                                              NUM      NUM     
VPN                       UPSTREAM  UPSTREAM  SERVICE  TUNNEL  
ID   GROUP       SOURCE   IF        TUNNEL    OILS     OILS    
---------------------------------------------------------------
1    224.0.1.39  0.0.0.0  ---       0.0.0.0   0        0       
1    224.0.1.40  0.0.0.0  ---       0.0.0.0   0        0       
1    225.0.0.1   0.0.0.0  ge0/4     0.0.0.0   0        1

Release Information

Command introduced in Viptela Software Release 14.2.

Additional Information

show ip mfib oil
show ip mfib stats

  • Was this article helpful?