Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show igmp interface

show igmp interface—Display information about the interfaces on which IGMP is enabled on the router (on vEdge routers only).

Command Syntax

show igmp interface [vpn vpn-id]
show igmp interface vpn vpn-id igmp-property

Options

None
Display information about all interfaces on which IGMP is enabled.
IGMP Options
igmp-property
Display interface information for a specific IGMP property. igmp-property can be one of the following: event, group-count, if-addr, querier, querier-ip, and state. Note that these options correspond to the column heads in the output of the plain show igmp interface command.
VPN
vpn​ vpn-id
Display IGMP information for interfaces in a specific VPN.

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show igmp interface 

                                                                              OTHER                
     IF                     GROUP                        QUERY                QUERIER              
VPN  NAME   IF ADDR         COUNT  QUERIER  QUERIER IP   INTERVAL    STATE    EXPIRY   EVENT       
---------------------------------------------------------------------------------------------------
1    ge0/4  10.20.24.15/24  0      true     10.20.24.15  0:00:02:00  querier  -        init-event  
1    ge0/5  56.0.1.15/24    1      true     56.0.1.15    0:00:01:51  querier  -        init-event

Release Information

Command introduced in Viptela Software Release 14.3.

  • Was this article helpful?