Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show dot1x interfaces

show dot1x interfaces—Display information about 802.1X–enabled interfaces (on vEdge routers only).

Command Syntax

show dot1x interfaces

Options

None

Output Fields

The output fields are self-explanatory.

Example

Display information about the 802.1X on an 802.1Z–enabled interface:

vEdge# show dot1x interfaces
      802.1X Interface Information:

      Interface ge0/1:
        Operational state           : Up
        Host mode                   : Multi Auth
        MAB server                  : true
        MAB local                   : true
        Wake On LAN                 : true
        Reauthentication period     : 600 seconds
        Inactivity timeout          : 3600 seconds
        Guest VLAN                  : 11
        Auth fail VLAN              : 12
        Auth reject VLAN            : 13
        Default VLAN                :
        Primary radius server       : 192.168.48.12
        Secondary radius server     : 192.168.48.11
        Interim accounting interval : disabled
        Number of connected clients : 1

      802.1X Interface Information:

      Interface ge0/2:
        Operational state           : Down
        Host mode                   : Single Host
        MAB server                  : false
        MAB local                   : false
        Wake On LAN                 : false
        Reauthentication period     : disabled
        Inactivity timeout          : disabled
        Guest VLAN                  : none
        Auth fail VLAN              : none
        Auth reject VLAN            : none
        Default VLAN                :
        Primary radius server       : 192.168.48.11
        Secondary radius server     : none
        Interim accounting interval : disabled
        Number of connected clients : 0

Release Information

Command introduced in Viptela Software Release 16.3.​

  • Was this article helpful?