Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show dhcp interface

show dhcp interface—Display information about interfaces that are DHCPv4 clients (on vEdge routers and vSmart controllers only).

Command Syntax

show dhcp interface [vpn vpn-id] [interface-name]
show dhcp interface [dns-list] [state]

Options

None
Display information about all interfaces that are DHCPv4 clients.
DNS Servers
dns-list
Display the DHCPv4 client DNS information.
Lease State
state
Display the DHCPv4 client interface state information.
VPN
vpnvpn-id
Display DHCPv4 client interface information for a specific VPN.

Output Fields

The state can be one of bound, init, rebind, release, renew, and request.

The DNS column lists the IPv4 addresses of the DNS servers returned by DHCPv4.

The remaining output fields are self-explanatory.

Example Output

vEdge# show dhcp interface 

                                                TIME                     
VPN  IFNAME  STATE  ACQUIRED IP     LEASE TIME  REMAINING   GATEWAY      
-------------------------------------------------------------------------
0    ge0/0   bound  192.168.1.3/24  1:00:00:00  0:13:42:01  192.168.1.1  
512  mgmt0   init   0.0.0.0/0       -           -           0.0.0.0         

vEdge# show dhcp interface detail 

                                                TIME                                         
VPN  IFNAME  STATE  ACQUIRED IP     LEASE TIME  REMAINING   GATEWAY      INDEX  DNS          
---------------------------------------------------------------------------------------------
0    ge0/0   bound  192.168.1.3/24  1:00:00:00  0:13:29:02  192.168.1.1  0      192.168.1.1  
512  mgmt0   init   0.0.0.0/0       -           -           0.0.0.0                   

Release Information

Command introduced in Viptela Software Release 14.3.

  • Was this article helpful?