Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

show cellular status

show cellular status—Display cellular status information (on vEdge routers only).

Command Syntax

show cellular status

Options

None

Output Fields

Interface
Name of the cellular interface.
Modem Status
Offline, Online, or Low Power Mode. Low power mode is similar to airplane mode and is set when the cellular interface is shutdown.
SIM Status
Ready or Not present
Signal Strength
Excellent, Good, Poor, or No signal. This is the same as the value for RSSI in the output of the show cellular radio command.
Network Status
Registered, Not registered, Searching, Registration denied, or Unknown.
Last Seen Error
The last seen error on cellular interfaces. 

Example Output

vEdge# show cellular status 
                                                            
                         SIM     RADIO  SIGNAL       
INTERFACE  MODEM STATUS  STATUS  MODE   STRENGTH   NETWORK STATUS  LAST SEEN ERROR        
--------------------------------------------------------------------------------------------
cellular0  Online        Ready   LTE    Excellent  Registered      None 

 

Release Information

Command introduced in Viptela Software Release 16.1.

  • Was this article helpful?