Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

request software verify-image

request software verify-image—Verify that a Viptela software image is valid and has been signed.

It is recommended that you issue a request software install or request software install-image command, or that you install device software from the vManage NMS, rather than using the request software verify-image command. Both these commands, as well as the vManage NMS image installation and upgrade processes, verify that the image is valid and has been signed before they install the software. If the verification process fails, the software image installation is not performed.

Command Syntax

request software verify-image filename

Options

Name of Software Image
filename
Name of the Viptela software image file. This file is a compressed tar file (filename extension tar.gz) on the local device. The tar file names have the following format, where x.x.x represents the release version:
• vEdge router—viptela-x.x.x-mips64.tar.gz
• vBond and vSmart—viptela-x.x.x86_64.tar.gz
• vManage—vmanage-x.x.x86_64.tar.gz

Output Fields

The output fields are self-explanatory.

Example Output

vManage# request software verify-image vmanage-16.1.0-x86_64.tar.gz 
verify OK
Signature verified for rootfs.img
Signature verified for vmlinuz
vManage# 

Release Information

Command introduced in Viptela Software Release 16.1.

  • Was this article helpful?