Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

clear pppoe statistics

clear pppoe statistics—Zero PPPoE statistics.

Command Syntax

clear pppoe statistics

Options

None

Output Fields

The output fields are self-explanatory.

Example Output

vEdge# show pppoe statistics

      pppoe_tx_pkts             :      73 
      pppoe_rx_pkts             :      39 
      pppoe_tx_session_drops    :      0 
      pppoe_rx_session_drops    :      0 
      pppoe_inv_discovery_pkts  :      0 
      pppoe_ccp_pkts            :      12 
      pppoe_ipcp_pkts           :      16 
      pppoe_lcp_pkts            :      35 
      pppoe_padi_pkts           :      4 
      pppoe_pado_pkts           :      2 
      pppoe_padr_pkts           :      2 
      pppoe_pads_pkts           :      2 
      pppoe_padt_pkts           :      2 

vEdge# clear pppoe statistics
vEdge# show pppoe statistics
 
      pppoe_tx_pkts             :      0 
      pppoe_rx_pkts             :      0 
      pppoe_tx_session_drops    :      0 
      pppoe_rx_session_drops    :      0 
      pppoe_inv_discovery_pkts  :      0 
      pppoe_ccp_pkts            :      0 
      pppoe_ipcp_pkts           :      0 
      pppoe_lcp_pkts            :      0 
      pppoe_padi_pkts           :      0 
      pppoe_pado_pkts           :      0 
      pppoe_padr_pkts           :      0 
      pppoe_pads_pkts           :      0
      pppoe_padt_pkts           :      0 

Release Information

Command introduced in Viptela Software Release 15.3.3.

Additional Information

See the Configuring PPPoE and Configuring Interfaces articles for your software release.
show ppp interface
show pppoe sessions
show pppoe statistics

  • Was this article helpful?