Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

no

no—Delete or unset a configuration command or parameter.

Command Syntax

no command

Options

Delete or Unset a Command
command
Delete or unset the specified command from the configuration.

Output Fields

None

Example Output

Delete the login banner from the configuration:

vm4(config)# banner login "Welcome to vEdge4"
vm4(config-banner)# commit and-quit 
Commit complete.
vm4# show running-config banner 
banner
 login "Welcome to vEdge4"
!
vm4# config
Entering configuration mode terminal
vm4(config)# no banner login
vm4(config)# commit and-quit 
Commit complete.
vm4# show running-config banner
% No entries found.

Enable the operation of an interface:

vm4# show running-config vpn 0 interface ge0/7vpn 0
 interface ge0/7
  ip address 10.0.100.14/24
  no shutdown
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.

Additional Information

Overview of Configuration Commands

  • Was this article helpful?