Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

user

snmp group—Configure an SNMPv3 user.

vManage Feature Template

For all Viptela devices:

Configuration ► Templates ► SNMP

Command Hierarchy

snmp
  user username
    auth authentication
    auth-password password
    group group-name
    priv privacy
    priv-password password

Options

Authentication Type and Password
auth authentication
auth-password password
Authentication mechanism to use for the user. authentication can be either message digest5 (md5) or SHA-2 message digest (sha). Enter the password either in cleartext or as an AES-encrypted key.
Group Name
group group-name
Name of an SNMPv3 group configured with the snmp group command. group-name can be 1 to 32 alphanumeric characters. If the name includes spaces, enclose it in quotation marks (" ").
Privacy Type and Password
priv privacy
priv-password password
Privacy mechanism to use for the user. privacy can be the Advanced Encryption Standard cipher algorithm used in cipher feedback mode, with a 128-bit key (aes-cfb-128). In Releases 17.1 and earlier, privacy can also be the data encryption standard algorithm (des).
Enter the password either in cleartext or as an AES-encrypted key.
Username
user username
Name of an SNMP user. It can be 1 to 32 alphanumeric characters. If the name includes spaces, enclose it in quotation marks (" ").

Operational Commands

show running-config snmp

Release Information

Command introduced in Viptela Software Release 16.2.​
In Release 17.2, remove support for DES privacy.

Additional Information

See the Configuring SNMP article for your software release.
group

  • Was this article helpful?