sdwan interface tloc-extension-gre-from—Configure an interface as an extended interface, to channel TLOC traffic from a source branch router to the local WAN interface (on IOS XE routers only).
vManage Feature Template
For Cisco IOS XE routers only:
Configuration ► Templates ► VPN Interface Ethernet
sdwan interface interface-name tloc-extension-gre-from extended-wan-interface-ip-address xconnect wan-interface-name
- Interface Name
Name of WAN interface that you are using for sending traffic over the extended TLOC.
- IP Address of GRE Tunnel Destination
IP address of the destination of the GRE tunnel that is being used as the TLOC interface.
GRE tunnel destination IP address of the TLOC interface. This is the interface in the branch router that you are using to extend the TLOC.
show sdwan bfd sessions
show sdwan control connections
show sdwan control local-properties
show sdwan interface
show sdwan omp tlocs
Bind two subinterfaces from Router 1 to two circuit interfaces on Router 2 so that Router 1 can establish TLOC connections in the overlay network. Router 2 has two circuits, one to the Internet and the second to an MPLS network. Router 1 is also located at the same site, but has no circuits and is on a different L3 network.
ISRK2# show sdwan running-config sdwan interface ge0/2.101 encapsulation dot1q 101 ip address 188.8.131.52/24 mtu 1496 ! interface ge0/2.102 encapsulation dot1q 102 ip address 184.108.40.206/24 mtu 1496 ! sdwan interface ge0/0 ip address 172.16.255.2 tunnel-interface color lte ! interface ge0/2.101 tloc-extension-gre-from 10.1.19.15 xconnect GigabitEthernet0/0 ! interface ge0/2.102 tloc-extension-gre-from 220.127.116.11 xconnect GigabitEthernet0/3 ! interface ge0/3 ip address 172.16.255.16 tunnel-interface color mpls ! ! !
Command introduced in XE SD-WAN Software Release 16.9.1.