Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

timers

vpn router ospf timers—Configure OSPF timers (on vEdge routers only).

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► OSPF

Command Hierarchy

vpn vpn-id
  router
    ospf
      timers
        spf delay initial-hold-time maximum-hold-time

Options

SPF Algorithm Timer
spf delay initial-hold-time maximum-hold-time
Configure the amount of time between when OSPF detects a topology and when it runs its SPF algorithm. This timer consists of three parts:

• Delay: Delay from first change received until performing the SPF calculation.
Range: 0 through 600000 milliseconds (60 seconds)
Default: 200 milliseconds

• Initial hold time: Initial hold time between consecutive SPF calculations.
Range: 0 through 600000 milliseconds (60 seconds)
Default: 1000 milliseconds

• Maximum hold time: Longest time between consecutive SPF calculations.
Range: 0 through 600000 milliseconds (60 seconds)
Default: 10000 milliseconds

Operational Commands

show ospf process

Example

Set the OSPF SPF timers:

vEdge# show running-config vpn 1 router ospf
vpn 1
 router
  ospf
   timers spf 300 1200 15000
   redistribute static
   redistribute omp
   max-metric router-lsa administrative
   area 0
    interface ge0/0
    exit
   exit
  !
 !
!
vEdge# show ospf process | include time     
 spf-holdtime          1200
 spf-max-holdtime      15000
 spf-last-exec-time    2607

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.

  • Was this article helpful?