Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

system

system—Configure system-wide parameters.

vManage Feature Template

For all Viptela devices:

Configuration ► Templates ► System

Command Hierarchy

system
  aaa
    admin-auth-order (local | radius | tacacs)
    auth-fallback
    auth-order (local | radius | tacacs)
    logs
      audit-disable
      netconf-disable
    radius-servers tag
    user username
      group group-name
      password password
    usergroup group-name
      task (interface | policy | routing | security | system) (read | write) 
  admin-tech-on-failure
  allow-same-site-tunnels
  archive 
    interval minutes 
    path file-path/filename 
    ssh-id-file file-path/filename 
    vpn vpn-id
  clock
    timezone timezone
  console-baud-rate rate 
  control-session-pps rate 
  description text 
  device-groups group-name
  domain-id domain-id
  eco-friendly-mode (on vEdge Cloud routers only)
  gps-location (latitude decimal-degrees | longitude decimal-degrees)
  host-name string
  host-policer-pps rate
  icmp-error-pps rate
  idle-timeout minutes
  iptables-enable
  location string
  logging
    disk
      enable
      file
        name filename        
        rotate number        
        size megabytes      
      priority priority
    host
      name (name | ip-address)
      port udp-port-number      
      priority priority      
      rate-limit number interval seconds
  multicast-buffer-percent percentage
  ntp 
    keys
      authentication key-id md5 md5-key
      trusted key-id
    server (dns-server-address | ip-address)
      key key-id
      prefer
      source-interface interface-name
      version number
  ​    vpn vpn-id
  organization-name string  
  port-hop
  port-offset number
  radius    
    retransmit number    
    server ip-address      
      auth-port port-number      
      priority number
      secret-key key 
      source-interface interface-name      
      tag tag​
      vpn vpn-id    
    timeout seconds
  route-consistency-check (on vEdge routers only) 
  site-id site-id  
  sp-organization-name name (on vBond orchestrators and vSmart controllers only)
  system-ip ip-address
  system-tunnel-mtu bytes
  tacacs 
    authentication authentication-type
    server ip-address      
      auth-port port-number      
      priority number
      secret-key key 
      source-interface interface-name    
      ​vpn vpn-id    
    timeout seconds 
  tcp-optimization-enabled (on vEdge routers only)
  timer
    dns-cache-timeout minutes 
  track-default-gateway
  track-interface-tag number
  track-transport 
  tracker tracker-name
    endpoint-dns-name dns-name
    endpoint-ip ip-address
    interval seconds
    multiplier number
    threshold milliseconds
  upgrade-confirm minutes
  [no] usb-controller (on vEdge 1000 and vEdge 2000 routers only)
  vbond (dns-name | ip-address [local] [port number] [ztp-server]

Example

Configure basic system parameters on a vEdge router:

vEdge# show running-config system 
system
 host-name         vEdge
 system-ip         172.16.255.14
 domain-id         1
 site-id           400
 port-offset       4
 organization-name "Viptela Inc"
 clock timezone America/Los_Angeles
 vbond 10.1.14.14 local
 aaa
  auth-order local radius
  usergroup basic
   task system read write
   task interface read write
  !
  usergroup netadmin
  !
  usergroup operator
   task system read
   task interface read
   task policy read
   task routing read
   task security read
  !
  user admin
   password $1$ZDmsKZbc$oVs.oZxEZPDAVLrBLJCR9.
  !
 !
 logging
  disk
   enable
  !
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the System and SNMP Overview article for your software release.

  • Was this article helpful?