Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation


snmp—Configure the Simple Network Management Protocol. The Viptela software supports SNMPv2 and SNMPv3 simultaneously.

By default, SNMP is disabled.

vManage Feature Template

For all Viptela devices:

Configuration ► Templates ► SNMP

Command Hierarchy

  community name    
    authorization (read-only | read-write)
    view string  
  contact string
  group group-name authentication
    view string
  location string  
  name string
  [no] shutdown
    group group-name
        level severity
    target vpn vpn-id ip-address udp-port
      community-name community-name
      group-name group-name
      source-interface interface-name
  user username
    auth authentication
    auth-password password
    group group-name
    priv privacy
    priv-password password
  view string    
    oid oid-subtree [exclude]

Operational Commands

show running-config snmp

Release Information

Command introduced in Viptela Software Release 14.1.​
Support for SNMP traps added in Release 15.2.
Support for SNMPv3 added in Release 16.2.

Additional Information

See the Configuring SNMP article for your software release.

  • Was this article helpful?