Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

send-community

vpn router bgp neighbor send-community—Send the local router's BGP community attribute to the BGP neighbor (on vEdge routers only).

This feature is disabled by default. If you have configured it, use the no send-community command to return to the default.

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► BGP

Command Hierarchy

vpn vpn-id
  router
    bgp local-as-number
      neighbor ip-address
        send-community

Options

None

Operation Mode Commands

show bgp neighbor

Example

Configure the local vEdge router to send the BGP community attribute to its BGP neighbor:

vEdge# show running-config vpn 1 router bgp neighbor 1.10.10.10
vpn 1
 router
  bgp 123
   neighbor 1.10.10.10
    no shutdown
    remote-as 456
    send-community
    !
   !
  !
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.

  • Was this article helpful?