Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

router-id

vpn router ospf router-id—Configure the OSPF router ID, which is the IP address associated with the router for OSPF adjacencies (on vEdge routers only).

Command Hierarchy

vpn vpn-id
  router
    ospf 
      router-id ipv4-address

Options

OSPF Router ID
ipv4-address
Configure the OSPF router ID as an IPv4 address, in decimal four-part dotted notation. The router ID can be used when electing the OSPF designated router (DR). if there is a tie in the router priority values, the node with the highest router ID becomes the DR or the backup DR. If you have configured a system IP address, that address is used for the OSPF router ID. If you configure a OSPF router ID that differs from the system IP address, the router ID takes precedence.

Operational Commands

show ospf process

Example

Configure the router ID for OSPF adjacencies in VPN 1:

vpn 1
  router
    ospf
      router-id 172.16.255.11

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

priority
system-ip
See the Configuring Unicast Overlay Routing article for your software release.

  • Was this article helpful?