Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

route-policy

policy route-policy—Configure or apply a localized control policy (on vEdge routers only). For BGP, you apply the policy to an address family running on a specific BGP neighbor. For OSPF, you can apply the policy either to specific types of routes being redistributed into OSPF or to all inbound traffic.

vManage Feature Template

For vEdge routers only:

Configuration ► Policies ► Localized Policy
Configuration ► Templates ► OSPF

Command Hierarchy

Create a Localized Control Policy

policy
  route-policy policy-name
    default-action action
    sequence number
      match
        address list-name
        as-path list-name
        community list-name
        ext-community list-name
        local-preference number
        metric number
        next-hop list-name
        omp-tag number
        origin (egp | igp | incomplete)
        ospf-tag number
        peer address
      action
        reject
        accept
          set
            aggregator number
            as-path (exclude | prepend) as-number
            atomic-aggregate
            community value
            local-preference number
            metric number
            metric-type (type1 | type2)
            next-hop ip-address
            omp-tag number
            origin (egp | igp | incomplete)
            originator ip-address
            ospf-tag number
            weight number

Apply a Localized Control Policy To BGP

vpn vpn-id
  router
    bgp local-as-number
      neighbor address
        address-family ipv4-upcast
          route-policy policy-name (in | out)

Apply a Localized Control Policy To OSPF

vpn vpn-id
  router
    ospf
      redistribute route-type route-policy policy-name
      route-policy policy-name in

Options

Control Policy Name
policy-name
Name of the localized control policy to configure or apply to a BGP neighbor or to OSPF. policy-name can be up to 32 characters long.
Direction To Apply Policy
in, out
Apply the policy to routes coming in to the router or being sent out of the router. For BGP, the policy can be applied to incoming or outgoing routes. For OSPF, the policy is apply to routes coming from OSPF neighbors. Use the OSPF redistribute command to apply policy to outgoing routes.

Release Information

Command introduced in Viptela Software Release 14.1.​
In Release 15.4, add support for configuring route policy on all OSPF inbound routes (route-policy in).

Additional Information

See the Policy Overview and Configuring Localized Control Policy articles for your software release.
policy
redistribute

  • Was this article helpful?