Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation


qos-map—Configure a QoS map, or apply a QoS map on an interface (on vEdge routers only). QoS is applied to unicast or multicast packets being transmitted out the interface.

vManage Feature Template

For vEdge routers only:

Configuration ► Policies ► Localized Policy
Configuration ► Templates ► VPN Interface Cellular (for vEdge cellular wireless routers only)
Configuration ► Templates ► VPN Interface Ethernet
Configuration ► Templates ► VPN Interface GRE
Configuration ► Templates ► VPN Interface PPP Ethernet

Command Hierarchy

Create a QoS Map

  qos-map map-name
    qos-scheduler class-name

Apply a QoS Map on an Interface

vpn vpn-id
  interface interface-name
    qos-map map-name


QoS Map Name
Name of the QoS map. It can be a text string from 1 through 32 characters long. When you are configuring a QoS map, it can contain 64 QoS schedulers. The interface cannot be a VLAN interface (subinterface). When you apply a QoS map to an interface, the map name must match that which you specified when you created the QoS with the policy qos-map configuration command.
QoS Scheduler
Name of a QoS scheduler configured with a policy qos-scheduler configuration command.


Create a QoS scheduler and QoS map, and apply it to an interface in VPN 1:

vEdge(config)# show config
 qos-scheduler af1
  class             af1
  bandwidth-percent 20
  buffer-percent    20
  drops             red-drop
 qos-map test-qos-map
  qos-scheduler af1
vpn 1
 interface ge0/0
  qos-map  test-qos-map

Release Information

Command introduced in Viptela Software Release 14.1.​
In Release 16.3, add support for multicast traffic.
Starting with Release 17.1, you can no longer configure qos-map on a VLAN interface.

  • Was this article helpful?