Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

policy ipv6

policy ipv6—Configure IPv6 policy (on vEdge routers only).

Command Hierarchy

Localized Data Policy for IPv6

Configure on vEdge routers only.

policy
  mirror mirror-name
    remote-dest ip-address source ip-address
  policer policer-name
    burst types
    exceed action
    rate bps
policy ipv6
  access-list acl-name
    default-action action
    sequence number
      match
        class class-name
        destination-port number
        next-header protocol
        packet-length number
        plp (high | low)
        source-port number
        tcp flag
        traffic-class value
      action
        drop
          count counter-name
          log
        accept
          class class-name
          count counter-name 
          log
          mirror mirror-name
          policer policer-name
          set
            traffic-class value

Options

None

Operational Commands

show running-config

Example

Configure an IPv6 ACL that changes the traffic class on TCP port 80 data traffic, and apply the ACL to an interface in VPN 0:

vEdge# show running-config policy ipv6 access-list 
policy
 ipv6 access-list traffic-class-48-to-46
 sequence 10
  match
   destination-port 80
   traffic-class    48
  !
  action accept
   count port_80
   log
   set
    traffic-class 46
   !
  !
 !
 default-action accept
 !
!
vEdge# show running-config vpn 0 interface ge0/7 ipv6
vpn 0
 interface ge0/7
  ipv6 access-list traffic-class-48-to-46 in
 !
!

Release Information

Command introduced in Viptela Software Release 16.3.

Additional Information

See the Policy Overview article for your software release.
policy (for IPv4)

  • Was this article helpful?