Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

passive-interface

vpn router ospf area interface passive-interface—Set the OSPF interface to be passive (on vEdge routers only). A passive interface advertises its address, but it does not actively run the OSPF protocol.

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► OSPF

Command Hierarchy

vpn vpn-id
  router
    ospfarea number
        interface interface-name
          passive-interface

Options

None

Operational Commands

show ospf interface

Example

Configure a passive OSPF interface:

vEdge(config)# show config
vpn 1
 router
  ospf
   area 0
    interface ge0/1
     passive-interface
    exit
   exit
  !
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.

  • Was this article helpful?