Skip to main content
Cisco SD-WAN
Product Documentation
Viptela Documentation


vpn interface dhcp-server options—Configure the DHCP options to send to the client when the DHCP client request them (on vEdge routers only).

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► DHCP Server

Command Hierarchy

vpn vpn-id
  interface geslot/port
        default-gateway ip-address
        dns-servers ip-address
        domain-name domain-name
        interface-mtu mtu
        tftp-servers ip-address


Default Gateway
default-gateway ip-address
IP address of a default gateway in the service-side network.
DNS Servers
dns-servers ip-address
One or more of IP addresses for a DNS server in the service-side network. You can specify up to eight addresses.
Domain Name
domain-name domain-name
Domain name that the DHCP client uses to resolve hostnames.
Interface MTU
interface-mtu mtu
MTU size on the interface to the DHCP client.
Range: 68 to 65535 bytes
TFTP Servers
tftp-servers ip-address
IP address of a TFTP server in the service-side network. You can specify one or two addresses.


Configure options to send when requested by a DHCP client:

vEdge# config
Entering configuration mode terminal
vEdge(config)# vpn 1 interface ge0/4
vm5(config-interface-ge0/4)# dhcp-server options 
vEdge(config-options)# default-gateway 
vEdge(config-options)# dns-servers 
vEdge(config-options)# tftp-servers 
vEdge(config-interface-ge0/4)# show full-configuration
vpn 1
 interface ge0/4

Release Information

Command introduced in Viptela Software Release 14.3.​

Additional Information

See the Configuring Interfaces article for your software release.

  • Was this article helpful?