Skip to main content
Cisco SD-WAN
Support
Product Documentation
Viptela Documentation

next-hop-self

vpn router bgp neighbor next-hop-self—Configure the router to be the next hop for routes advertised to the BGP neighbor (on vEdge routers only).

This feature is disabled by default. If you configure it, use the no next-hop-self command to return to the default.

vManage Feature Template

For vEdge routers only:

Configuration ► Templates ► BGP

Command Hierarchy

vpn vpn-id
  router
    bgp local-as-number
      neighbor ip-address
        next-hop-self

Options

None

Operational Commands

show bgp routes

Example

Configure the local vEdge router to be the next hop to its BGP neighbor:

vm1# show running-config vpn 1 router bgp neighbor 1.10.10.10
vpn 1
 router
bgp 123
  neighbor 1.10.10.10
    no shutdown
    remote-as 456
   next-hop-self
    !
   !
  !
 !
!

Release Information

Command introduced in Viptela Software Release 14.1.​

Additional Information

See the Routing CLI Reference article for your software release.

  • Was this article helpful?